The Elements of Zinc Plating That Must Be Found on a Roof

When we talk about roof renovation, we often forget that there is a finishing stage, including the installation of zinc plumbing. Yet, this set of elements is essential to ensure the roof’s waterproofing and that of the house. Discover the features of zinc work that you must find on the roof of your house.

The Ridge

This is the joint that connects the two sides of a roof. It is located at the top of the roof. The ridge is an essential element in the construction of a roof because it has two roles:

To Maintain the Roof

A pitched roof has slopes, so the tiles are not laid continuously at the junction. It is, therefore, necessary to ensure the meeting point of the slopes so that they do not become detached. Hence the importance of a ridge.

Ensuring the Roof Is Watertight

The junction at the top of a roof is a good way for rainwater to infiltrate if it is not covered. This can lead to rapid deterioration of the roof. Moreover, you have the choice between several types of ridges for your roof. However, it will depend on the type of roofing used.

The Valley

This type of zinc roofing is mainly found on the inside corners of L-shaped, T-shaped, or double-sided roofs. Like the ridge, the valley prevents water from passing through the roof.

It also facilitates the flow of water to the gutter. Indeed, its presence and the fact that it is connected to the gutter allow it to concentrate rainwater at the corners of the roof and lead it to the gutter.

Thus, a roof with valleys will be better protected against water leaks at the junctions in case of heavy rain. In addition, its roofing will be less affected by humidity because the evacuation of rainwater will be facilitated.

The Flashing

This component plays an essential role in protecting your home against water leaks. Indeed, it ensures a better waterproofing of your roof. However, it is only present on roofs with a chimney, vent column, or separate roof due to a different wall level.

The flashing maintains the roofing continuity so that water does not get in between the joints created by the separations. It is installed around the roof’s intersections from the vent stack or chimney stump.

Fascia Cladding

The fascia is an essential part of the roof as a technical and decorative element. It is a metal strip covering the edge of the fascia board of a roof. Its primary role is to protect the borders from bad weather.

In fact, the edges directly connected to the frame can be responsible for its deterioration. Indeed, with time, they become a shelter for rodents or birds. The latter then attack the framework and weaken your roof. Hence the importance of reinforcing its protection.

Roofer or Zinc Worker: Which One to Contact?

Now that you understand the importance of zinc work, you must be very vigilant and uncompromising if you plan to carry out roofing work. Indeed, you will have to verify that the zinc roofing has been properly installed. However, sometimes a roofer does not include the installation of the zinc roofing in their service. This is why you should contact a roofer and a zinc worker.

However, you can reduce your expenses by calling a roofer-galvanizer. Indeed, this professional will be able to carry out all the stages of the construction of a roof.

Thanks to his intervention, you will benefit from a solid roof and will not fear the waterproofness of your house. In addition to the installation, he can take care of the repair of the various components of zinc work. Moreover, he will tell you if an element is necessary or not.

Leave a Reply

Your email address will not be published.